Módulo de Relevador 5v - 1 Canal

por Oky
$55.00

SKU: OS-30113
En stock: 43

Este es un módulo de relevadores de 5 V y 1 canal. Puede ser controlado directamente por un amplia variedad de microcontroladores tales como Arduino, AVR, PIC, ARM y MSP430.

This module conform international safety standard, the isolation groove between control areas and load area
With optical coupling isolation, triggering more reliable, more stable
The double FR-4 circuit board design
Have power and relay operation instructions.The LED will be lit when relay on
Signal input with a high level signal, the common pin and the normally opened pin will connected
Relay can directly control all kinds of equipment and load
One normally open pin and a normally closed pin
Blue KF301 terminal, more convenient
Module Size: 53x18x18.5mm/2.08*0.7*0.72""

Module interface:
Input:
VCC: Connect to power positive (according to the relay voltage range)
GND: Connect to power negative
IN: Relay module trigger pin (high level trigger)

Output:
Normally Opened (NO) : Normally open pin of relay. NO pin is not connect to COM pin when relay off.NO pin is connect to COM pin when relay on;
Common pin (COM) : Common pin of the relay;
Normally closed (NC) : Normally close pin of relay.NC pin is connect to COM pin when relay off.NC pin is not connect to COM pin when relay on;
Onboard 5V, 10A/250VAC, 10A 30VDC relay


Reseñas

Based on 1 review Escribe una Reseña

Reseñas

Based on 1 review Escribe una Reseña

Visto recientemente

Borrar productos vistos